![]() ![]() Once you get the hang of nailing, you'll find that using a few smooth, well-placed blows is far more successful than trying to ferociously pound a nail with great force. The blow should not be violent, just a gradually accelerating swing. Just as you contact the nail head, there should be a slight forward snap of the wrist. Watch the head of the nail (not the hammer), as you swing forward with an accelerating motion.Draw back the hammer primarily with elbow motion, along with a slight backward bend of the wrist.Place the hammerhead centered on the head of the nail.Hold the nail perfectly perpendicular to the nailing surface. Hold the nail near the top, just under the head, with the sharp tip positioned where you want to drive the nail. ![]() Here's the proper procedure to hammer a nail without bending it: If you've ever watched a beginner, though, you'll understand that this isn't as easy as it sounds. Let's now consider some tips for effectively using the curved-claw hammer to learn the proper way to hammer a nail like a pro.Īlthough this sounds self-evident, striking the nail square on the head is the goal when using a hammer. Cub hammer or sledgehammer: These are different sizes of the same basic hammer design-heavy-headed tools used for demolition or masonry work.The other side of the hammer has a flat face for driving drywall nails. Drywall hammer: This tool has a small ax face on one side of the head which can be used to knock holes in drywall.Mallet: made of wood or rubber designed to strike wood without leaving damaging marks. ![]() It is available in many sizes. It's designed specifically to score and split bricks or break small pieces off of rocks. Mason hammer: This is a hammer that has a striking face on one side and a chisel-shaped cutting pick on the other side.Ball peen hammer: This hammer has one flat-faced head and one rounded head the specially hardened steel is designed for metalwork.Some tack hammers have a magnetic head that can hold tiny tacks by the head to make them easier to drive. Tack hammer: This tool usually has two striking surfaces at either end of the head it is used for driving small brads and tacks, such as carpet tacks.Some of the other specialty hammers to consider: ![]() They are not meant to pound on stone or concrete, and should not be used to drive steel masonry chisels or other metal objects. Remember that both of these types of claw hammers are designed for striking hardened nails and wood. Framing hammers look similar to standard claw hammers, but the claws are straighter, the handle is longer, and the head is considerably heavier. Those are for pro carpenters or very experienced DIYers who are doing a lot of rough-carpentry work or demolition jobs. Most homeowners can stay away from specialty hammers, such as the 20 to 30-ounce ripping-claw framing hammer, though this hammer is often used to drive concrete nails. A smaller hammer will be easier to control for many people. But if you're looking for a little lighter version of this hammer, consider its little brother, the 13-ounce curved claw hammer. If you're going to have one hammer only, this is a good choice. The hammer that is found in most homes-and a decent choice for all-around versatility-is the 16-ounce curved-claw hammer on the far left, shown here.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |